APTOSOL SPF 50- SERUM+ TONER +CC CREAM

Korean Sunscreen / Antiaging Serum / cc cream toner combination. Aptosol SPF 50/ UVA PA++++ 15g - Metal Free!
groundbreaking invention that goes far beyond the usual standards
Without harmful metal particles such as zinc oxide or titanium oxide!
The top 9 benefits of Aptosol
1. Blocks UVA for 13 hours
2. Blocks UVB for 13 hours
3. Adhesive properties of sunscreen
4. Also suitable for pregnant women and children
5. Skin friendly
6. Easily washable with soap.
7. Prevents horn formation.
8. Very good makeup base
9. All in one for basic – skin care products
The UV protective effect of conventional UV care products is shown here.
So far there have only been two types of sun protection products
(UV cut products) UVA absorbers and UV scattering agents.
While UV absorbers absorb UV light themselves,
UV scattering agent prevents UV light from reaching the skin,
by allowing sunlight, including UV light, to bounce off.
UVA absorbers or UV scatterers are in most cases
mixed with titanium oxide or zinc oxide.
However, these UV absorbers have the disadvantage
that they are sparingly soluble with other solutions and crystallise.
For this reason, only a limited amount can be added.
UV scattering agents are powders which, due to their physical properties,
create microscopic gaps.
Applied to the skin through the perforated film
UV light penetrate and the collagen and elastin of the skin are destroyed.
Premature skin aging, loss of elasticity and the risk of skin cancer
caused by excessive solar radiation is the result.
In addition, B-waves with a shorter wavelength either
absorbed or reflected by the UV-B absorber.
has solved all the bottlenecks of conventional products,
by introducing a special oil solution (Esterol No. 26),
which can evenly dissolve UV-A absorbent and a
has developed a special anti UV molecular structure.
What is put on the skin is the UV-AB Protector,
which has a very ordered structure.
Ultraviolet A is absorbed by the UV-A absorber and partly reflected.
Ultraviolet B is absorbed and partially reflected.
All ultraviolet rays
are treated directly upon arrival at the skin surface and
never reach the skin tissue.
Your skin is thus perfectly protected.
Because nano-inorganic sunscreens are particles smaller than ultrafine dust,
metallic materials are absorbed into the skin and accumulated in the body.
APTOSOL does not contain any metal
There isKorean Sunscreen / Antiaging Serum / cc cream toner combination. Aptosol SPF 50/ UVA PA++++ 15g - Metal Free!
A proprietary formulatio that goes far beyond the usual standards
Without harmful metal particles such as zinc oxide or titanium oxide!
The top 9 benefits of Aptosol
1. Blocks UVA for 13 hours
2. Blocks UVB for 13 hours
3. Adhesive properties of sunscreen
4. Also suitable for pregnant women and children
5. Skin friendly
6. Easily washable with soap.
7. Prevents horn formation.
8. Very good makeup base
9. All in one for basic – skin care products
The UV protective effect of conventional UV care products is shown here.
So far there have only been two types of sun protection products
(UV cut products) UVA absorbers and UV scattering agents.
While UV absorbers absorb UV light themselves,
UV scattering agent prevents UV light from reaching the skin,
by allowing sunlight, including UV light, to bounce off.
UVA absorbers or UV scatterers are in most cases
mixed with titanium oxide or zinc oxide.
However, these UV absorbers have the disadvantage
that they are sparingly soluble with other solutions and crystallise.
For this reason, only a limited amount can be added.
UV scattering agents are powders which, due to their physical properties,
create microscopic gaps.
Applied to the skin through the perforated film
UV light penetrate and the collagen and elastin of the skin are destroyed.
Premature skin aging, loss of elasticity and the risk of skin cancer
caused by excessive solar radiation is the result.
In addition, B-waves with a shorter wavelength either
absorbed or reflected by the UV-B absorber.
has solved all the bottlenecks of conventional products,
by introducing a special oil solution (Esterol No. 26),
which can evenly dissolve UV-A absorbent and a
has developed a special anti UV molecular structure.
What is put on the skin is the UV-AB Protector,
which has a very ordered structure.
Ultraviolet A is absorbed by the UV-A absorber and partly reflected.
Ultraviolet B is absorbed and partially reflected.
All ultraviolet rays
are treated directly upon arrival at the skin surface and
never reach the skin tissue.
Your skin is thus perfectly protected.
Because nano-inorganic sunscreens are particles smaller than ultrafine dust,
metallic materials are absorbed into the skin and accumulated in the body.
APTOSOL does not contain any metal
There is a study that titanium nanoparticles,
used in sunscreens and cosmetics can cause nerve damage
cells_ (Environmental Science and Technology Journal)
Aptosol does not contain titanium nanoparticles
The World Health Organization (WHO) points out that
that the absorption of metal components in humans various diseases
such as lung cancer, liver cancer, multiple sclerosis and stroke.
Aptosol does not use any metal components.
Aptosol allows penetration of beneficial selectively visible wavelengths,
so that despite UVA / UVB protection, light therapy is possible.
Aptosol active ingredients are surrounded by a 5-layer protective shell, inhibits coli growth and
maintains a fresh formulation whenever used.
Aptosol sunscreens are used in hospitals, dermatology and plastic surgery.
There is no white film and it absorbs gently.
Both UV-A absorbers and UV-B absorbers are scattered.
Since the UV-A absorber in particular crystallizes,
if more than a certain amount is added,
technically only a limited amount can be added.
As a result, ultraviolet A penetrates the skin,
whereby both UV-A absorbers and UV-B absorbers
can come into direct contact with the skin.
Direct contact of the absorbent with the skin
can cause skin damage.
The novel solution, Esterol #26,
tightly encloses the group of absorbents,
namely, UV-A absorbers and UV-B absorbers.
For this reason, unlike conventional UV care products
a considerable amount of UV-A absorbers are added,
resulting in total protection from UV-A penetration into the skin.
Furthermore, since both UV-A and UV-B absorbers inside
are coated by Esterol#26 and water,
avoiding direct contact with the skin,
the structure is skin-friendly.
Since the outside is also made of water or
moisturizing ingredients,
protects the skin during use
with a light and smooth feel and
can with special cleaning foam
be rinsed off freshly.
The best comes last.
You know the typical white faces that are covered with conventional sunscreen?
Aptosol™ not only feels velvety soft and comfortable, Aptosol™ is also invisible on the skin and serves as the perfect base for your make-up.
 
Ingredients:
WATER, ETHYLHEXYL, METHOXYCINNAMATE, SQUALANE , BUTYLENE GLYCOL, DIETHYLAMINO, HYDROXYBENZOYL HEXYL BENZOATE, TRIISOSTEARIN, DIMETHICONE, BUTYL METHOXYDIBENZOYLMETHANE, DIPROPYLENE GLYCOL, OCTYLDODECANOL , ETHYLHEXYL POLYHYDROXYSTEARATE , VP/EICOSENE COPOLYMER , ROSA DAMASCENA FLOWER WATER, POLY (C30-45 OLEFIN), SORBITAN SESQUIISOSTEARATE , SORBITAN ISOSTEARATE, GLYCERIN , RAFFINOSE , PRUNUS AMYGDALUS DOLCIS (SWEET ALMOND) OIL, MACADAMIA INTEGRIFOLIA SEED OIL, BEHENIC ACID, STEARIC ACID, BEHENYL ALCOHOL, OLEA EUROPAEA (OLIVE) FRUIT OIL, GLYCERYL STEARATE , AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, GLYCERYL CAPRYLATE, SODIUM DILAURAMIDOGLUTAMIDE LYSINE, SIMMONDSIA CHINENSIS (JOJOBA) SEED OIL, ISOPROPYL ISOSTEARATE, POLYGLYCERYL - 10 MYRISTATE, CITRUS AURANTIUM DULCIS (ORANGE) OIL, XANTHAN GUM, LAVANDULA ANGUSTIFOLIA (LAVENDER) OIL, TOCOPHEROL, T-BUTYL ALCOHOL, ANTHEMIS NOBILIS FLOWER OIL, SODIUM HYALURONATE, RHODOMYRTUS TOMENTOSA FRUIT EXTRACT, EUGENIA CARYOPHYLLUS (CLOVE) FLOWER EXTRACT, ARTEMISIA CAPILLARIS FLOWER EXTRACT